TurboLamik TurboLamik

Parameters / AWD

AWD

All-wheel-drive and transfer-case parameters, per program.

15 parameters: 3 documented, 3 covered by a family note, 9 not yet documented. 3 of the undocumented ones carry the vendor's own description and nothing else.

15 parameters

AWD Base

# 0x2E6E 3×16
Base transfer map of the attached front drive, in percent, looked up against torque at the wheels (the x-axis table). The AWD row of the Program Selector picks which row (N, S1 or S2) applies, with 3 = off per the selector legend (inferred from labels, not verified in firmware).
See also: AWD Base ( x-axis) · 0x45F8
Detail

TurboLamik XDF

Transfer base map of the attached drive (%)

From the official base maps what they contain, not what it does

Values differ between official base maps (3 distinct variants); across all 16 they span 10 to 125.

Address
0x1C05 7173
Size
3×16 cells
Width
8-bit
Firmware
10.75, 10.77

AWD Base ( x-axis)

# 0x516F 1×16
The x-axis of the AWD Base map: torque on the wheels, the load against which the base transfer percentage is looked up.
See also: AWD Base
Detail

TurboLamik XDF

Torque on the wheels

From the official base maps what they contain, not what it does

All 16 official base maps are identical here, spanning -100 to 10000.

Indexed by columns 1 to 16 NM in 16 steps.

Address
0x1BE5 7141
Size
1×16 cells
Width
16-bit
Firmware
10.75, 10.77

AWD Output

# 0x4480 1×1
How the AWD coupling is driven: 0 = PWM output, 1 = CAN to the E90/E60 ACT300 xDrive transfer case, 2 = CAN to the E70 X5/X3 6HP ACT700.
See also: AWD Base
Detail

TurboLamik XDF

0- PWM 1- Can1 E90/E60 ACT300 X-Drive 2- Can1 E70 X5/X3 6HP ACT700 X-drive

From the official base maps what they contain, not what it does

Every official base map ships 0.

Address
0x1E1F 7711
Size
1×1 value
Width
8-bit
Firmware
10.75, 10.77

Foodbrake Signal Correction

# Vendor description only 0x4ABB 3×1

TurboLamik XDF

If you enter 199% in the map, then the drive is turned on at 100%

From the official base maps what they contain, not what it does

Values differ between official base maps (2 distinct variants); across all 16 they span 0 to 100.

Detail
Address
0x1C77 7287
Size
3×1 cells
Width
8-bit
Firmware
10.75, 10.77
10.75 name
Foodbrake Signal Correction

Gear Correction

# Vendor description only 0x73B6 3×10

TurboLamik XDF

If you enter 199% in the map, then the drive is turned on at 100% DC

From the official base maps what they contain, not what it does

Values differ between official base maps (2 distinct variants); across all 16 they span 50 to 100.

Indexed by columns 1 to 8 in 10 steps.

Detail
Address
0x1C35 7221
Size
3×10 cells
Width
8-bit
Firmware
10.75, 10.77
10.75 name
Gear correction

Hand Brake Signal DC

# 0x5484 3×1
No explanation exists yet.

From the official base maps what they contain, not what it does

Every official base map ships 5 in all 3 cells.

Detail
Address
0x1F23 7971
Size
3×1 cells
Width
8-bit
Firmware
10.75, 10.77

Hold Output DC

# 0x7125 1×1
No explanation exists yet.

From the official base maps what they contain, not what it does

Official base maps ship 20 on 8HP50, 8HP51, 8HP70, 8HP75; 100 on 8HP45, 8HP90.

Detail
Address
0x1F78 8056
Size
1×1 value
Width
8-bit
Firmware
10.75, 10.77

Max output DC

# 0x345B 1×1
No explanation exists yet.

From the official base maps what they contain, not what it does

Official base maps ship 29.8 on 8HP50, 8HP51, 8HP70, 8HP75; 100 on 8HP45, 8HP90.

Detail
Address
0x1F77 8055
Size
1×1 value
Width
8-bit
Firmware
10.75, 10.77

POT DC Multiplier

# Vendor description only 0x6033 3×8

TurboLamik XDF

If you enter 198% in the map, then the drive is turned on at 100% DC

From the official base maps what they contain, not what it does

All 16 official base maps are identical here, spanning 0 to 199.22.

Detail
Address
0x1C5E 7262
Size
3×8 cells
Width
8-bit
Firmware
10.75, 10.77
10.75 name
POT DC Multipler

POT DC Multiplier (x-axis)

# 0x5B06 1×8
No explanation exists yet.

From the official base maps what they contain, not what it does

All 16 official base maps are identical here, spanning 0.61 to 4.45.

Indexed by columns 1 to 8 in 8 steps.

Detail
Address
0x1C56 7254
Size
1×8 cells
Width
8-bit
Firmware
10.75, 10.77
10.75 name
POT DC Multipler (x-axis)

Potentiometer input

# 0x43C5 1×1
No explanation exists yet.

From the official base maps what they contain, not what it does

Every official base map ships 0.

Detail
Address
0x1C76 7286
Size
1×1 value
Width
8-bit
Firmware
10.75, 10.77

Steering Sensor & TPS N- Mode

# family 0x3817 11×6
Steering-angle and throttle correction to the AWD transfer, one map per mode: the AWD row of the Program Selector picks which applies (0 Normal, 1 S1, 2 S2; 3 turns the coupling off). Per the official note, entering 199% turns the drive fully on (100%). No published tuning guidance exists for these maps.
Detail

TurboLamik XDF

If you enter 199% in the map, then the drive is turned on at 100%

From the official base maps what they contain, not what it does

Values differ between official base maps (2 distinct variants); across all 16 they span 0 to 129.69.

Indexed by rows 10 to 100 % in 11 steps.

Address
0x1C9E 7326
Size
11×6 cells
Width
8-bit
Firmware
10.75, 10.77

Steering Sensor & TPS S1- Mode

# family 0x1A0A 11×6
Steering-angle and throttle correction to the AWD transfer, one map per mode: the AWD row of the Program Selector picks which applies (0 Normal, 1 S1, 2 S2; 3 turns the coupling off). Per the official note, entering 199% turns the drive fully on (100%). No published tuning guidance exists for these maps.
Detail

TurboLamik XDF

If you enter 199% in the map, then the drive is turned on at 100%

From the official base maps what they contain, not what it does

Values differ between official base maps (2 distinct variants); across all 16 they span 0 to 129.69.

Indexed by rows 10 to 100 % in 11 steps.

Address
0x1CE0 7392
Size
11×6 cells
Width
8-bit
Firmware
10.75, 10.77

Steering Sensor & TPS S2- Mode

# family 0x2003 11×6
Steering-angle and throttle correction to the AWD transfer, one map per mode: the AWD row of the Program Selector picks which applies (0 Normal, 1 S1, 2 S2; 3 turns the coupling off). Per the official note, entering 199% turns the drive fully on (100%). No published tuning guidance exists for these maps.
Detail

TurboLamik XDF

If you enter 199% in the map, then the drive is turned on at 100%

From the official base maps what they contain, not what it does

Values differ between official base maps (3 distinct variants); across all 16 they span 0 to 129.69.

Indexed by rows 10 to 100 % in 11 steps.

Address
0x1D22 7458
Size
11×6 cells
Width
8-bit
Firmware
10.75, 10.77

Steering Sensor V/S TPS (x-axis)

# 0x7CB2 1×6
No explanation exists yet.

From the official base maps what they contain, not what it does

Values differ between official base maps (2 distinct variants); across all 16 they span 0 to 373.9.

Detail
Address
0x1C92 7314
Size
1×6 cells
Width
16-bit
Firmware
10.75, 10.77

Names and groups follow the TurboLamik XDF. Values are not published here: open your own .bin in Map Studio to see what your map actually holds, and verify anything you change against the official manual.