TurboLamik TurboLamik

← All ECUs

Emtron → TurboLamik

Supported

Uses the TurboLamik TCU stream v2 (the same stream as Link v2).

CAN settings

  • TCU stream v2 = CAN standard 7

Notes

  • Configure the CAN stream to match standard 7.
  • The v2 stream (standard 7) carries the footbrake flag, so the footbrake can come over CAN. A wired footbrake on pin 11 (A7) still works as a fallback.
  • Torque is calculated internally by the TCU. Verify it before adaptation.

Official reference: Emtron on manual.turbolamik.eu. Always confirm against the latest TunerPro driver files from download.turbolamik.eu.