TurboLamik TurboLamik

← All ECUs

Ecumaster EMU Black / Classic → TurboLamik

Well supported

Maps onto the EMU CAN stream by emulating the CSB v3 expansion board.

CAN settings

  • CAN2 Type Car = 1

Notes

  • Emulates the Ecumaster CAN Switch Board v3.
  • Use the Analog CAN Out map for any custom parameters.
  • Frame addressing is in decimal in the EMU software.
  • The CSB v3 stream does not carry the footbrake. Wire the footbrake to pin 11 (A7).
  • Torque is calculated internally by the TCU. Verify it before adaptation.
  • EMU Black V3 uses the same Ecumaster type (Can2A Type Car = 1); confirm your stream settings in TunerPro.

Official reference: Ecumaster EMU Black / Classic on manual.turbolamik.eu. Always confirm against the latest TunerPro driver files from download.turbolamik.eu.